Metalwax is a new formula high performance AMS Certified product made for demanding polishing applications. A soft non separating gel for fast application on large surfaces. Metalwax is fully weatherproof for exterior use. Complete stain removal for any metal, even acid burned metal.
We don't just sell these products, we use them & test them all the time. Every object in the photos on this web site were hand or machined polished with our products big & small. We invite you to browse the pages of our site and see for yourself.
Metalwax & Top Wax products are tuned for maximum shine performance, fast application, maximum brightness and weatherproof durability
Both products are aircraft certified and are approved for use on Boeing aircraft
You will be impressed with the speed, power and durability of these fine products.
Metalwax is suitable for small objects or extremely large trucks, or Aircraft
This is the point of this product. When you take the time to polish something very large that involves a lot of labor, you want this shine to last a long time. We know how important your labor is, that is why our Metalwax product is the only metal polish that can be washed off instead of the laborious task of endless buffing. It is weather proof, wash proof, stain proof, dirt proof, with an enduring shine.
HERE'S WHY
Other brands of metal polish contain mostly rouge compounds or other abrasives & mineral spirits. They are like liquid dirt in a bottle. As you rub this abrasive on the metal it wears off the surface to a new layer of metal that shines. The down side is, when the compounds grind on the surface they disintegrate into micro fine particles that get pushed into the pores of the metal below the surface, once this happens you can't remove it The more you polish the more dirt you push into the metal, the worse it gets. When you wash the metal with soap, the soap contains alkaline which is corrosive. Corrosives eat dirt, that is their job, this is how the soap cleans.
When the soap hits the impacted polishing compounds it tries to eat it out of the pores of the metal, but it can't because when you polished the metal you pushed the compounds in deep below the surface. What happens instead is the micro fine compounds absorb the liquid soap, it becomes a sponge & causes the soap to stick to the metal. What you get when this happens is shine decay. The more you polish with liquid dirt the faster this cycle happens, until you have so much left over dirt & soap on the metal you can't polish it anymore. Then you have to re-cut the surface with a buffer and the shine decay starts all over again.
METAL WAX STOPS SHINE DECAY
Our exclusive fluoride metal cleaner cleans everything off the metal. Instantly removes all stains, all the old polishing compounds, soap scum, corrosion, dirt, absolutely everything from below the surface. You now have total clean metal to work with. You then apply the Metalwax. The wax polishes, waxes and seals in one fast operation. The wax goes in below the surface. " It fills the metal in" and dries hard. There is no left over compounds for the soap to react with and dirt and soap will not stick to the wax. The corrosive soap is not reactive to the wax, your shine holds
WE BELIEVE YOU DESERVE MORE SHINE & LESS WORK FOR YOUR MONEY!
THIS IS WHAT METALWAX IS ALL ABOUT